I placed a low bid on an auction for 25 Elitedesk 800 G1s on a government auction and unexpectedly won (ultimately paying less than $20 per computer)
In the long run I plan on selling 15 or so of them to friends and family for cheap, and I’ll probably have 4 with Proxmox, 3 for a lab cluster and 1 for the always-on home server and keep a few for spares and random desktops around the house where I could use one.
But while I have all 25 of them what crazy clustering software/configurations should I run? Any fun benchmarks I should know about that I could run for the lolz?
Edit to add:
Specs based on the auction listing and looking computer models:
- 4th gen i5s (probably i5-4560s or similar)
- 8GB of DDR3 RAM
- 256GB SSDs
- Windows 10 Pro (no mention of licenses, so that remains to be seen)
- Looks like 3 PCIe Slots (2 1x and 2 16x physically, presumably half-height)
Possible projects I plan on doing:
- Proxmox cluster
- Baremetal Kubernetes cluster
- Harvester HCI cluster (which has the benefit of also being a Rancher cluster)
- Automated Windows Image creation, deployment and testing
- Pentesting lab
- Multi-site enterprise network setup and maintenance
- Linpack benchmark then compare to previous TOP500 lists
This is only about 21 amps. Most outlets in a home are 15amps but 20amps isn’t unheard of. From one outlet doubtful but yes one house would provide that much power easily if you split them up to three or 4 rooms on different breakers.
Now it would be fun to watch his electric meter spin like a saw blade … (yes I’m old … I remember meters that had spinning discs)
Just two 15A breakers is enough actually. Outlets are supposed to be able to sustain 80% power, so you should be able to pull 1.44kW from a singly puny Nema 5-15.
Well true but I was assuming the circuits had some things drawing a little power. Flipping on a device and tripping a breaker with 12 machines on it wouldn’t be ideal :)
I have done this before in my upstairs home lab. 3 beefy ESXi machines, some nas storage, and a basic 10gbe switch eats up a lot of a single 15amp circuit. And apparently turning on a TV pushes it over the edge. Luckily the UPS saved my but while a reset the breaker and shut some stuff off.
Just two 15A breakers is enough actually. Outlets are supposed to be able to sustain 80% power, so you should be able to pull 1.44kW from a singly puny Nema 5-15.